Show simple item record

dc.contributor.authorXiaobin Song
dc.contributor.authorFrank Lam
dc.contributor.authorHao Huang
dc.contributor.authorMinjuan He
dc.date.accessioned2017-05-08T21:59:02Z
dc.date.available2017-05-08T21:59:02Z
dc.date.copyrightJune 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000206.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68050
dc.description.abstractThis paper presents the results of an experimental study on the critical buckling load and lateral bracing force of metal plate connected wood truss assemblies. Material property tests—including the modulus of elasticity of dimension lumber, flexural stiffness of plywood panels, and load-slip relationship of nail connection—and full-scale tests of individual trusses and truss assemblies were conducted. The critical buckling load and lateral bracing force were recorded. The continuous lateral bracing, the load sharing and distribution effects, and the residual deformation at the metal plate connections were studied for their influence on the system’s stability performance. The adequacy of the 2% rule of thumb, which is used by some design engineers for lateral bracing system design, was also discussed by comparing to the test results of the lateral bracing forces. The generated database can be used as input parameters and for verification for numerical analysis models and therefore contributes to the improvement of the design methods in the long term.
dc.publisherAmerican Society of Civil Engineers
dc.titleStability Capacity of Metal Plate Connected Wood Truss Assemblies
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000163
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record