Show simple item record

dc.contributor.authorJung-Pyo Hong
dc.contributor.authorDavid Barrett
dc.date.accessioned2017-05-08T21:59:02Z
dc.date.available2017-05-08T21:59:02Z
dc.date.copyrightJune 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000203.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68047
dc.description.abstractA three-dimensional nonlinear finite-element model of single nail connection was developed based on transversely isotropic plasticity. In order to have the connection model account for crushing behavior of wood during the nail embedment, a procedure was studied to implement the theory of a beam on a nonlinear foundation in the solid element modeling. Within a prescribed volume of wood surrounding a nail, a wood foundation was defined with the foundation material parameters, which were determined through nail-embedment tests. Introduction of the wood foundation to the connection model was justified by comparing the results of nail-embedment simulations with or without a wood foundation. Three-dimensional finite-element analyses of single nail connections incorporated with wood foundations were compared with the results of lateral resistance tests of the connections under parallel to grain loading and perpendicular to grain loading. The model predictions showed good agreement with the load-slip relations and the actual deformed shapes of the connections.
dc.publisherAmerican Society of Civil Engineers
dc.titleThree-Dimensional Finite-Element Modeling of Nailed Connections in Wood
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000160
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record