Show simple item record

dc.contributor.authorBarbara Rossi
dc.contributor.authorJean-Pierre Jaspart
dc.contributor.authorKim J. R. Rasmussen
dc.date.accessioned2017-05-08T21:59:01Z
dc.date.available2017-05-08T21:59:01Z
dc.date.copyrightApril 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000193.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68036
dc.description.abstractThis paper provides a critical summary of the European standards and design methods available for calculating the strength of cold-formed stainless steel compression members. The standards considered (so far mainly applied to columns failing by flexural buckling) are applied to the case of lipped channel section columns failing by combined distortional and overall flexural-torsional buckling. As observed during the tests presented in a companion paper, distortional buckling is found to have a considerable effect on the cross section resistance and is prone to interact with the global flexural-torsional mode. It is investigated how the different formulations account for the two buckling modes and their interaction and how accurate strength predictions they provide. A new direct strength method taking into account these failure modes is then presented and compared to the test results.
dc.publisherAmerican Society of Civil Engineers
dc.titleCombined Distortional and Overall Flexural-Torsional Buckling of Cold-Formed Stainless Steel Sections: Design
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000147
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail
This item appears in the following Collection(s)

Show simple item record