Show simple item record

dc.contributor.authorBradley F. Coffman
dc.contributor.authorJoseph A. Main
dc.contributor.authorDat Duthinh
dc.contributor.authorEmil Simiu
dc.date.accessioned2017-05-08T21:59:00Z
dc.date.available2017-05-08T21:59:00Z
dc.date.copyrightJune 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000186.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68028
dc.description.abstractPeak bending moments are compared for a set of steel portal frames of industrial buildings in an open terrain calculated using database-assisted design (DAD) techniques and ASCE 7-05 Standard plots. The comparisons indicate that, depending on the building dimensions, the peak bending moments at the knee based on DAD techniques are generally larger by 10–30% than their counterparts based on the ASCE 7-05 plots. (In one case with a relatively steep roof slope of 26.6° the discrepancies exceed 70%.) For the buildings considered, the discrepancies increase with increasing roof slope and with increasing eave height.
dc.publisherAmerican Society of Civil Engineers
dc.titleWind Effects on Low-Rise Metal Buildings: Database-Assisted Design versus ASCE 7-05 Standard Estimates
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue6
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000140
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record