Show simple item record

dc.contributor.authorBarbara Rossi
dc.contributor.authorJean-Pierre Jaspart
dc.contributor.authorKim J. R. Rasmussen
dc.date.accessioned2017-05-08T21:58:59Z
dc.date.available2017-05-08T21:58:59Z
dc.date.copyrightApril 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000178.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/68019
dc.description.abstractThis paper presents a series of 48 full-scale tests on press-braked stainless steel lipped channel section columns subjected to concentric compression. The tests were carried out between fixed ends in the Structures Laboratory of the University of Liège and the test specimens were designed such that distortional buckling developed in the section prior to overall flexural-torsional buckling. The stainless steel alloy was 1.4003 chromium weldable steel, popularly known as 3Cr12. Three different geometries were tested using the same experimental setup. A critical summary of the standards and methods for calculating the carrying capacity of cold-formed stainless steel compression members is presented in a companion paper by the same writers.
dc.publisherAmerican Society of Civil Engineers
dc.titleCombined Distortional and Overall Flexural-Torsional Buckling of Cold-Formed Stainless Steel Sections: Experimental Investigations
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue4
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000130
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record