Show simple item record

dc.contributor.authorCurt B. Haselton
dc.contributor.authorJack W. Baker
dc.contributor.authorAbbie B. Liel
dc.contributor.authorGregory G. Deierlein
dc.date.accessioned2017-05-08T21:58:57Z
dc.date.available2017-05-08T21:58:57Z
dc.date.copyrightMarch 2011
dc.date.issued2011
dc.identifier.other%28asce%29st%2E1943-541x%2E0000149.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/67994
dc.description.abstractOne of the challenges of assessing structural collapse performance is the appropriate selection of ground motions for use in the nonlinear dynamic collapse simulation. The ground motions should represent characteristics of extreme ground motions that exceed the ground-motion intensities considered in the original building design. For modern buildings in the western United States, ground motions that cause collapse are expected to be rare high-intensity motions associated with a large magnitude earthquake. Recent research has shown that rare high-intensity ground motions have a peaked spectral shape that should be considered in ground-motion selection and scaling. One method to account for this spectral shape effect is through the selection of a set of ground motions that is specific to the building’s fundamental period and the site hazard characteristics. This selection presents a significant challenge when assessing the collapse capacity of a large number of buildings or for developing systematic procedures because it implies the need to assemble specific ground-motion sets for each building. This paper proposes an alternative method, whereby a general set of far-field ground motions is used for collapse simulation, and the resulting collapse capacity is adjusted to account for the spectral shape effects that are not reflected in the ground-motion selection. The simplified method is compared with the more direct record selection strategy, and results of the two approaches show good agreement.
dc.publisherAmerican Society of Civil Engineers
dc.titleAccounting for Ground-Motion Spectral Shape Characteristics in Structural Collapse Assessment through an Adjustment for Epsilon
dc.typeJournal Paper
dc.journal.volume137
dc.journal.issue3
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000103
dc.treeJournal of Structural Engineering:;2011:;Volume ( 137 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record