Show simple item record

dc.contributor.authorNatalino Gattesco
dc.contributor.authorLorenzo Macorini
dc.contributor.authorMassimo Fragiacomo
dc.date.accessioned2017-05-08T21:58:56Z
dc.date.available2017-05-08T21:58:56Z
dc.date.copyrightFebruary 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000143.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/67989
dc.description.abstractThe paper investigates the design of continuous steel-concrete composite beams with compact cross section using the elastic analysis with limited redistribution. The permissible moment redistribution which satisfies the requirements of the ultimate limit state (collapse) and serviceability limit state (crack width in the concrete slab) was computed. An advanced finite element program accounting for all mechanical nonlinearities and time-dependent phenomena (creep and shrinkage of concrete) was used. An extensive parametric analysis aimed to determine the influence of several geometrical parameters on the permissible moment redistribution was carried out on propped cantilevers and fixed-end beams. The analyzed parameters include the shape of the steel profile, the ratio between the depths of concrete slab and steel beam, the steel to concrete area ratio, and the reinforcement percentage of the concrete slab. The analysis was limited to compact steel sections (AISC 360-05) or class 1 steel sections (Eurocode 3) and low ductility reinforcing steel (elongation at maximum load
dc.publisherAmerican Society of Civil Engineers
dc.titleMoment Redistribution in Continuous Steel-Concrete Composite Beams with Compact Cross Section
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000098
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record