Show simple item record

dc.contributor.authorThomas J. Mander
dc.contributor.authorGeoffrey W. Rodgers
dc.contributor.authorJ. Geoffrey Chase
dc.contributor.authorJohn B. Mander
dc.contributor.authorGregory A. MacRae
dc.contributor.authorRajesh P. Dhakal
dc.date.accessioned2017-05-08T21:58:52Z
dc.date.available2017-05-08T21:58:52Z
dc.date.copyrightNovember 2009
dc.date.issued2009
dc.identifier.other%28asce%29st%2E1943-541x%2E0000104.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/67950
dc.description.abstractExisting welded steel moment frames are designed to tolerate substantial yielding and plastic rotation under earthquake loads. This sacrificial design approach can lead to permanent, and often irreparable damage when interstory drifts exceed 2%. The experimental seismic performance of a 50% full-scale damage avoidance designed structural steel beam-column connection is presented. The beam-column joint region consists of a top flange-hung beam connected to the column by an angle bracket. High-force-to-volume (HF2V) devices are attached from the column to the beam to provide joint rigidity and energy dissipation as the joint opens and closes. The HF2V devices are connected either below the beam flange or concealed above the beam’s lower flange. Reversed cyclic lateral load tests are conducted with drift amplitudes up to 4%. No damage is observed in the principal beam and column structural elements. The need for stiff device connections to achieve optimal device performance is demonstrated, and potential design solutions presented. Stable hysteresis and repeatable energy dissipation for a large number of cycles up to the 4% drift level is observed. It is concluded that superior and repeatable energy dissipation without damage can be achieved for every dynamic motion cycle, in contrast to conventional sacrificially designed welded moment frame connections.
dc.publisherAmerican Society of Civil Engineers
dc.titleDamage Avoidance Design Steel Beam-Column Moment Connection Using High-Force-to-Volume Dissipators
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue11
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000065
dc.treeJournal of Structural Engineering:;2009:;Volume ( 135 ):;issue: 011
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record