Show simple item record

dc.contributor.authorGraeme J. Ballantyne
dc.contributor.authorAndrew S. Whittaker
dc.contributor.authorGary F. Dargush
dc.contributor.authorAmjad J. Aref
dc.date.accessioned2017-05-08T21:58:51Z
dc.date.available2017-05-08T21:58:51Z
dc.date.copyrightFebruary 2010
dc.date.issued2010
dc.identifier.other%28asce%29st%2E1943-541x%2E0000090.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/67935
dc.description.abstractIn blast engineering, many designs begin with simplified hand procedures with the loading parameters determined based upon a reflective surface of infinite size. Individual structural members such as columns have finite widths and should be considered as finite surfaces for blast loading calculations. A study was performed to investigate the effect of finite flange width on blast loadings on structural components. The diffraction of a blast wave around the leading edges of the cross section and the propagation of rarefaction waves from the leading edges to the column centerline leads to a more rapid reduction in reflected pressure than that of an infinite surface: a process that is widely known as clearing. A series of analyses were performed using the computational fluid dynamics code Air3d. Peak reflected pressures are not changed by the “finiteness” of the section, although the reflected impulse can be substantially reduced by clearing. For a given charge mass, held constant for a range of stand-off distances,
dc.publisherAmerican Society of Civil Engineers
dc.titleAir-Blast Effects on Structural Shapes of Finite Width
dc.typeJournal Paper
dc.journal.volume136
dc.journal.issue2
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000049
dc.treeJournal of Structural Engineering:;2010:;Volume ( 136 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record