Show simple item record

dc.contributor.authorKazunori Fujikake
dc.contributor.authorBing Li
dc.contributor.authorSam Soeun
dc.date.accessioned2017-05-08T21:58:49Z
dc.date.available2017-05-08T21:58:49Z
dc.date.copyrightAugust 2009
dc.date.issued2009
dc.identifier.other%28asce%29st%2E1943-541x%2E0000080.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/67924
dc.description.abstractThis paper examines the impact responses of reinforced concrete (RC) beams through an experimental study and presents an analytical model developed to predict the maximum midspan deflection and maximum impact load, which aids as an important performance index to evaluate the damage levels of RC beams when subjected to impact loadings. The experimental study involves a drop hammer impact test and investigates the influence of drop height and the effect of the amount of longitudinal steel reinforcement contributes to the response of RC beams. The RC beam specimens used in the experiment comprised of under-reinforced sections provided with sufficient amount of transverse reinforcements to allow for an overall flexural failure. The experimental impact responses of the RC beams were simulated with two-degree-of-freedom mass-spring-damper system model, in which the loading rate effects were duly considered. The analytical results are in good agreement with the experimental results for the RC beams that exhibited overall flexural failure.
dc.publisherAmerican Society of Civil Engineers
dc.titleImpact Response of Reinforced Concrete Beam and Its Analytical Evaluation
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue8
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000039
dc.treeJournal of Structural Engineering:;2009:;Volume ( 135 ):;issue: 008
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record