Show simple item record

dc.contributor.authorSherif El-Tawil
dc.contributor.authorEkin Ekiz
dc.date.accessioned2017-05-08T21:58:47Z
dc.date.available2017-05-08T21:58:47Z
dc.date.copyrightMay 2009
dc.date.issued2009
dc.identifier.other%28asce%29st%2E1943-541x%2E0000056.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/67900
dc.description.abstractA new method is proposed for inhibiting the buckling response of steel braces. The strengthening technique involves attaching a core comprised of mortar blocks to the braces and then wrapping the entire system with carbon fiber-reinforced polymer (CFRP) sheets. An advantage of this method is that the technology can be applied in situ by a single individual with minimal training. Test results of seven specimens subjected to reversed axial loading show that it is feasible to achieve buckling restrained response up to 2% interstory drift. Other than the number of longitudinal fiber layers, it is observed that performance of the strengthening scheme depends upon the size of the core material, the presence of bond between the steel plate and core material, the existence of extra stitch plates for double angle members, and the presence of transverse CFRP layers at the member ends. It is also observed that double angle braces benefit more from the strengthening scheme than single angle braces, which are prone to premature out-of-plane buckling.
dc.publisherAmerican Society of Civil Engineers
dc.titleInhibiting Steel Brace Buckling Using Carbon Fiber-Reinforced Polymers: Large-Scale Tests
dc.typeJournal Paper
dc.journal.volume135
dc.journal.issue5
dc.journal.titleJournal of Structural Engineering
dc.identifier.doi10.1061/(ASCE)ST.1943-541X.0000003
dc.treeJournal of Structural Engineering:;2009:;Volume ( 135 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record