Show simple item record

dc.contributor.authorViet V. Ngo
dc.contributor.authorAbderrazak Latifi
dc.contributor.authorMarie-Odile Simonnot
dc.date.accessioned2017-05-08T21:50:27Z
dc.date.available2017-05-08T21:50:27Z
dc.date.copyrightOctober 2014
dc.date.issued2014
dc.identifier.other%28asce%29hy%2E1943-7900%2E0000020.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/63827
dc.description.abstractPreferential flow may significantly affect the acceleration of contaminant transport, which can be described by the use of nonequilibrium models such as dual-porosity and dual-permeability models. Its modeling requires many parameters that are generally difficult to measure. The determination of the parameters in these nonequilibrium models from experimental measurements is a challenging task and is usually carried out using parameter optimization methods. In this study, prior to the identification process, an estimability analysis was carried out in order to determine the set of the most estimable parameters in the dual-porosity model from the available experimental data collected from the field lysimeter (pressure heads, water contents, cumulative percolation, and evaporation). The most estimable parameters were then identified, and the less estimable ones were fixed from previous studies, literature, or additional measures. The results obtained from the estimability analysis showed that five out of the eight parameters were estimable from the combination of daily pressure heads and water contents. The five estimable parameters were then identified using the Levenberg-Marquardt method implemented within one-dimensional finite-element model software. Saturated water contents in the mobile and immobile regions were impossible to estimate simultaneously due to their high correlation. When the water transfer coefficient was included in the identification procedure, the optimization results worsened due to its low estimability from pressure heads and water contents. Removing saturated water content in the immobile region and saturated hydraulic conductivity, which had a strong correlation with more estimable parameters, led to the improvement of the optimization results. As a result, the water transfer parameter was estimated with reliability.
dc.publisherAmerican Society of Civil Engineers
dc.titleSoil Hydraulic Parameters Characterizing Preferential Water Flow: Estimability Analysis and Identification
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue10
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)HE.1943-5584.0000953
dc.treeJournal of Hydrologic Engineering:;2014:;Volume ( 019 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record