Show simple item record

dc.contributor.authorHabib Hakimzadeh
dc.contributor.authorVahid Nourani
dc.contributor.authorAlireza Babaeian Amini
dc.date.accessioned2017-05-08T21:50:04Z
dc.date.available2017-05-08T21:50:04Z
dc.date.copyrightApril 2014
dc.date.issued2014
dc.identifier.other%28asce%29he%2E1943-5584%2E0000881.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/63746
dc.description.abstractIn this paper, genetic programming (GP) was used to simulate outflow hydrograph from earthen dam breach. The required data for the modeling were collected from literature, new experimental tests, and a physically based model. A number of homogeneous cohesive and noncohesive embankments were constructed in the flume and breached by overtopping flows. In the experiments, 40 embankments were constructed and tested in various sizes with different materials. The results demonstrate that the results of the GP method are in good agreement with the observed values. The model was tested for a case study (Teton Dam). In addition, an experimental-based broad-crest weir (EXBCW), a lumped model for calculating the peak outflow discharge due to an earth dam breach, was proposed on the basis of the governing equation of broad-crest weir outflow and experimental data. Finally, the results of the EXBCW model were compared with the observed data and results of empirical and GP-based methods.
dc.publisherAmerican Society of Civil Engineers
dc.titleGenetic Programming Simulation of Dam Breach Hydrograph and Peak Outflow Discharge
dc.typeJournal Paper
dc.journal.volume19
dc.journal.issue4
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)HE.1943-5584.0000849
dc.treeJournal of Hydrologic Engineering:;2014:;Volume ( 019 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record