Show simple item record

dc.contributor.authorToon Goormans
dc.contributor.authorPatrick Willems
dc.date.accessioned2017-05-08T21:49:25Z
dc.date.available2017-05-08T21:49:25Z
dc.date.copyrightFebruary 2013
dc.date.issued2013
dc.identifier.other%28asce%29he%2E1943-5584%2E0000611.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/63481
dc.description.abstractContemporary sewer system operation heavily relies on urban drainage model results. In a case study near Leuven, Belgium, this research investigates the potential of a cost-effective local area weather radar (LAWR) for providing rainfall input to sewer models. Before rainfall estimation was possible, the radar was calibrated using tipping bucket rain gauge measurements. Various calibration methods were investigated, and a nonlinearly regressed power law function taking range to the radar into account was most suitable in this case study. Rainfall estimations could be slightly improved by rendering the calibration dependent on radar output. Fifty-seven events were simulated using the InfoWorks CS modeling software, and the effect of radar input on model results was investigated. There were large quantitative deviations, but the qualitative course of time series observed in conduits was reproduced well. Although certain events show a higher correspondence between measured and simulated time series when using radar-driven input, the gauge-driven input generally outperforms the former in this case study and the accompanying model.
dc.publisherAmerican Society of Civil Engineers
dc.titleUsing Local Weather Radar Data for Sewer System Modeling: Case Study in Flanders, Belgium
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue2
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)HE.1943-5584.0000589
dc.treeJournal of Hydrologic Engineering:;2013:;Volume ( 018 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record