Show simple item record

dc.contributor.authorJorge Rodriguez-Hernandez
dc.contributor.authorDaniel Castro-Fresno
dc.contributor.authorAndrés H. Fernández-Barrera
dc.contributor.authorÁngel Vega-Zamanillo
dc.date.accessioned2017-05-08T21:49:11Z
dc.date.available2017-05-08T21:49:11Z
dc.date.copyrightMay 2012
dc.date.issued2012
dc.identifier.other%28asce%29he%2E1943-5584%2E0000501.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/63364
dc.description.abstractPorous asphalt is used in Permeable Pavement Systems, but it is sensitive to surface clogging, which leads to a loss in its infiltration capacity. Test methods based on the use of permeable pavement models, which are manufactured in a laboratory and assessed under different clogging conditions, such as slope, rain, and runoff, have been widely applied to the study of permeable pavements with concrete blocks but not to the study of porous bituminous mixtures. The Cantabrian Fixed (CF) Infiltrometer has been used for the study of porous asphalt with void percentages between 20 and 33%. Three clogging scenarios were studied: 1) newly placed surface, 2) surface with an average maintenance level, and 3) clogged surface. Each clogging scenario was tested with five different slopes: 0, 2, 5, 8, and 10% and three repetitions. The direct rainfall simulation was produced by five lines of bubblers over the
dc.publisherAmerican Society of Civil Engineers
dc.titleCharacterization of Infiltration Capacity of Permeable Pavements with Porous Asphalt Surface Using Cantabrian Fixed Infiltrometer
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue5
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)HE.1943-5584.0000480
dc.treeJournal of Hydrologic Engineering:;2012:;Volume ( 017 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record