Show simple item record

dc.contributor.authorHossein Afzalimehr
dc.contributor.authorMohammad Abdolhosseini
dc.contributor.authorVijay P. Singh
dc.date.accessioned2017-05-08T21:48:48Z
dc.date.available2017-05-08T21:48:48Z
dc.date.copyrightOctober 2010
dc.date.issued2010
dc.identifier.other%28asce%29he%2E1943-5584%2E0000280.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/63131
dc.description.abstractThis study compared the downstream hydraulic geometry relations for stable channel design derived by other investigators with the equations derived from the data gathered from Iranian rivers based on the at-a-station method. For these rivers measurements of 425 velocity profiles and nearly 6,000 point velocities for 85 cross sections were employed to accurately determine flow discharge at a specified river section. For at-a-station method, grain size and the Shields parameter were not important for the determination of width and depth of a stable channel. It was found that the dominant or at-a-station discharge did not affect the discharge exponent in the depth equation, but it affected the discharge exponent in the width equation. Furthermore, discharge was not the controlling variable for the prediction of slope of stable channels, but grain size and the Shields parameter were.
dc.publisherAmerican Society of Civil Engineers
dc.titleHydraulic Geometry Relations for Stable Channel Design
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue10
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)HE.1943-5584.0000260
dc.treeJournal of Hydrologic Engineering:;2010:;Volume ( 015 ):;issue: 010
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record