Impacts of Construction Activity on Bioretention Performance
Abstract
Bioretention cells are incorporated as part of low impact development (LID) because of their ability to release influent runoff as exfiltration to the soil or evapotranspiration to the atmosphere. However, little care is taken as to the techniques used to excavate bioretention cells, and there is little concern as to the soil-moisture condition during excavation. Certain excavation techniques and soil-moisture conditions create higher levels of compaction which consequently reduce infiltration capacity. Two excavation techniques, the conventional “scoop” method which purposefully smears the underlying soil surface and the “rake” method which uses the teeth of an excavator’s bucket to scarify the underlying soil surface, were tested. Field tests were conducted on three soil types (sand, loamy sand, and clay) under a variety of antecedent soil-moisture conditions. Multiple hydraulic conductivity, surface infiltration, and soil compaction measurements were taken for each excavated condition. In all cases, the rake method of excavation tended to yield more permeable, less compacted soils than the scoop method. The difference of infiltration and hydraulic conductivity between the two excavation techniques was statistically significant