Show simple item record

dc.contributor.authorWilliam C. Lucas
dc.date.accessioned2017-05-08T21:48:35Z
dc.date.available2017-05-08T21:48:35Z
dc.date.copyrightJune 2010
dc.date.issued2010
dc.identifier.other%28asce%29he%2E1943-5584%2E0000155.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/63003
dc.description.abstractThis article presents the elements involved in the design of a bioretention planter/trench infiltration-detention system as part of a very large-scale urban retrofit project. The prototype system was designed to intercept all of the runoff from a synthetic 5.08-mm 24-h rainfall event. Diverted flows were conveyed into bioretention planter for treatment. The bioretention systems were fingerprinted into areas comprising 0.8% of the contributory drainage areas, with an associated stone trench comprising another 3.4%. As layered systems, an approach that is capable of modeling vertical flows in addition to dynamic routing of outflows is used. The system was first modeled using HydroCAD, a design storm event modeling software. A four-compartment node system is used to model the dynamics of flow through the layers. The system was then modeled using SWMM 5.0.014 continuous simulation software. The resulting response to a design storm was computed by both of these models to compare the results of each method. The resulting SWMM model was then run on the 2005 design year rainfall distribution. Under existing conditions, over 60% of annual runoff volume exceeded the
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign of Integrated Bioinfiltration-Detention Urban Retrofits with Design Storm and Continuous Simulation Methods
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue6
dc.journal.titleJournal of Hydrologic Engineering
dc.identifier.doi10.1061/(ASCE)HE.1943-5584.0000137
dc.treeJournal of Hydrologic Engineering:;2010:;Volume ( 015 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record