Show simple item record

dc.contributor.authorRafiqul A.
dc.contributor.authorTarefder
dc.contributor.authorMesbah U.
dc.contributor.authorAhmed
dc.date.accessioned2017-05-08T21:45:48Z
dc.date.available2017-05-08T21:45:48Z
dc.date.copyrightApril 2014
dc.date.issued2014
dc.identifier.other%28asce%29gm%2E1943-5622%2E0000318.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/61705
dc.description.abstractThe falling weight deflectometer (FWD) testing develops a deflection basin on the pavement surface. Depths of this deflection basin from the center of the falling weight are measured at different radial offsets. These deflections are used for the backcalculation of the pavement layer moduli. Most of the available backcalculation software uses the layered elastic theory and static load to calculate moduli from known pavement surface deflections. However, the FWD test load is dynamic, and layer materials may show nonelastic behavior. Layered elastic theory in these types of software cannot characterize dynamic response of the pavement. Also, elastic theory is unable to accurately predict the surface deflection whenever stress developed in any pavement layer exceeds the yield point. For this reason, this study has performed a finite-element analysis of the airport pavement under the FWD test considering the dynamic load and materials plasticity. The analysis presented here includes elastoplastic behavior of pavement layer materials. Both axisymmetric and quarter cube models have been developed in
dc.publisherAmerican Society of Civil Engineers
dc.titleModeling of the FWD Deflection Basin to Evaluate Airport Pavements
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000305
dc.treeInternational Journal of Geomechanics:;2014:;Volume ( 014 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record