• Login
    View Item 
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    •   DSpace Home
    • ASCE
    • International Journal of Geomechanics
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Performance Monitoring of a Glass Fiber-Reinforced Polymer Bar Soil Nail during Laboratory Pullout Test Using FBG Sensing Technology

    Thumbnail
    View/Open
    %28asce%29gm%2E1943-5622%2E0000239.pdf (1.134Mb)
    Date
    2013
    Author
    Huafu
    Pei
    Jianhua
    Yin
    Honghu
    Zhu
    Chengyu
    Hong
    Metadata
    Show full item record
    Abstract
    In this paper, the stress–strain state and the effectiveness of shear resistance of a glass fiber-reinforced polymer (GFRP) bar soil nail in a pullout test was studied in laboratory using fiber Bragg grating (FBG) sensing measurement. Both experimental study and numerical simulation were carried out and results are compared in this paper. In the pullout test, cement slurry was grouted into one predrilled borehole with a GFRP bar in a completely decomposed granite (CDG) soil mass, forming a cement-grouted GFRP bar soil nail. This GFRP bar soil nail was pulled out from the CDG soil mass in laboratory to investigate the performance of the GFRP bar soil nail during the pullout test process. Three loading cycles were applied to pull the GFRP bar soil nail out. Compared with traditional electricity-based strain gauges, FBG sensing technique is a relative novel technology to geotechnical structures health monitoring and has a number of advantages including high accuracy, multiplexing, electromagnetic interference resistance, and good repeatability. In the current study, one fiber line had a series of FBG strain sensors with a sequence of initial wavelengths. This fiber line with five FBG strain sensors was adhered on the pregrooved GFRP bar before grouting and was used to measure the strain distribution along this GFRP bar with cement grout during a pullout test. The mechanical behavior of the GFRP bar soil nail is evaluated by using the measured strain results in the paper. It is found that the pullout results of the GFRP bar soil nail are in good agreement with numerical calculation results. Test results also show that the FBG sensors are reliable for measuring the strain variation at all measured points under different loading stages. Furthermore, a simplified pullout resistance model originally proposed for GFRP pipe soil nails was employed to examine the laboratory pullout results of a GFRP bar soil nail. It is found that the simplified pullout resistance model is also applicable for the GFRP bar soil nail.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/61629
    Collections
    • International Journal of Geomechanics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV