Show simple item record

dc.contributor.authorRichard J. Bathurst
dc.contributor.authorBingquan Huang
dc.contributor.authorTony M. Allen
dc.date.accessioned2017-05-08T21:45:34Z
dc.date.available2017-05-08T21:45:34Z
dc.date.copyrightAugust 2012
dc.date.issued2012
dc.identifier.other%28asce%29gm%2E1943-5622%2E0000232.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/61622
dc.description.abstractThe results of load and resistance factor design (LRFD) calibration are reported for the pullout limit state in geogrid reinforced soil walls under self-weight loading and permanent uniform surcharge. Bias statistics are used to account for the prediction accuracy of the underlying deterministic models for load and pullout capacity and the random variability in the input parameters. The paper shows that the current AASHTO simplified method to calculate reinforcement loads under operational conditions is overly conservative leading to poor prediction accuracy of the underlying deterministic model used in LRFD calibration. Refinements to the load and default pullout capacity models in the AASHTO and Federal Highway Administration guidance documents are proposed. These models generate reasonable resistance factors using a load factor of 1.35 and give a consistent probability of pullout failure of 1%. A comparison with the allowable stress design (ASD) past practice shows that the operational factors of safety using a reliability-based LRFD approach give factors of safety greater than 1.5. Regardless of the design approach (ASD or LRFD), the analysis results demonstrate that the current empirical minimum reinforcement length criteria will likely control the design for pullout.
dc.publisherAmerican Society of Civil Engineers
dc.titleLRFD Calibration of the Ultimate Pullout Limit State for Geogrid Reinforced Soil Retaining Walls
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue4
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000219
dc.treeInternational Journal of Geomechanics:;2012:;Volume ( 012 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record