Show simple item record

dc.contributor.authorJ. A.
dc.contributor.authorRodriguez-Gutierrez
dc.contributor.authorJ. Dario
dc.contributor.authorAristizabal-Ochoa
dc.date.accessioned2017-05-08T21:45:33Z
dc.date.available2017-05-08T21:45:33Z
dc.date.copyrightApril 2013
dc.date.issued2013
dc.identifier.other%28asce%29gm%2E1943-5622%2E0000222.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/61611
dc.description.abstractDesign aids (nomograms) for rectangular and symmetrical trapezoidal rigid spread footings are developed using a method previously developed by the writers in a companion paper. The nomograms can be used by designers to directly determine their maximum axial load and biaxial moment capacities without exceeding the bearing capacity of the supporting soil. Three different types of pressure distribution at the soil-footing interface are considered: uniform, linear, and parabolic. The results obtained can then be compared with the biaxial moment-axial load interaction diagrams of the attached concrete walls or columns. This allows the structural designer to determine the vulnerability and likelihood of exceeding the bearing capacity of the supporting soil. Four examples are presented that show the effectiveness and simplicity of the proposed nomograms in the analysis of isolated rectangular and trapezoidal rigid spread footings resting on soil.
dc.publisherAmerican Society of Civil Engineers
dc.titleRigid Spread Footings Resting on Soil Subjected to Axial Load and Biaxial Bending. II: Design Aids
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000210
dc.treeInternational Journal of Geomechanics:;2013:;Volume ( 013 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record