Show simple item record

dc.contributor.authorSubha Sankar
dc.contributor.authorChowdhury
dc.contributor.authorKousik
dc.contributor.authorDeb
dc.contributor.authorAniruddha
dc.contributor.authorSengupta
dc.date.accessioned2017-05-08T21:45:32Z
dc.date.available2017-05-08T21:45:32Z
dc.date.copyrightJune 2013
dc.date.issued2013
dc.identifier.other%28asce%29gm%2E1943-5622%2E0000219.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/61607
dc.description.abstractThis paper discusses the development of a numerical model for a braced excavation to estimate the various design parameters that significantly influence the excavation's behavior. The results of the numerical model were compared with those of a reported case study of a braced excavation in sand, and close agreement between the results was observed. The developed model is used for parametric study to show the influence of different design parameters, such as strut stiffness, wall thickness, strut arrangement and the embedded depth of the wall on strut force, maximum moment developed in the wall, maximum lateral displacement of the wall, and maximum vertical displacement of ground surface. It was found that, among all the combinations studied, a particular type of strut arrangement for a particular ratio of embedded depth and excavation depth produces the best possible result. A design guideline is also presented based on the results of this numerical study.
dc.publisherAmerican Society of Civil Engineers
dc.titleEstimation of Design Parameters for Braced Excavation: Numerical Study
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000207
dc.treeInternational Journal of Geomechanics:;2013:;Volume ( 013 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record