Show simple item record

dc.contributor.authorMd. Rokonuzzaman
dc.contributor.authorToshinori Sakai
dc.date.accessioned2017-05-08T21:45:21Z
dc.date.available2017-05-08T21:45:21Z
dc.date.copyrightApril 2012
dc.date.issued2012
dc.identifier.other%28asce%29gm%2E1943-5622%2E0000132.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/61517
dc.description.abstractAnchor foundations of various embedment ratios, shapes, and sizes are frequently used in civil engineering structures to provide uplift resistance. Therefore, to achieve economic and safe design of such foundations, engineers should understand the failure mechanism associated with them. In the present study, a three-dimensional (3D) finite element model incorporating an elastoplastic material model coupled with the isotropic strain-softening law, the nonassociated flow rule, and the shear-band effect, is used to investigate the failure mechanisms of vertically uploaded shallow rectangular anchor foundations buried in dense Toyoura sand. Satisfactory agreement was found between the experimental and numerical uplift resistance-displacement factor relationships. In particular, the peak uplift resistance, response stiffness, and passive plastic zone development are found to be functions of the embedment ratio, shape, and size. However, previous design approaches cannot capture the size effect on the peak uplift resistance factor of the rectangular anchor foundation.
dc.publisherAmerican Society of Civil Engineers
dc.titleModel Tests and 3D Finite Element Simulations of Uplift Resistance of Shallow Rectangular Anchor Foundations
dc.typeJournal Paper
dc.journal.volume12
dc.journal.issue2
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000119
dc.treeInternational Journal of Geomechanics:;2012:;Volume ( 012 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record