Show simple item record

dc.contributor.authorB. Chevalier
dc.contributor.authorP. Villard
dc.contributor.authorG. Combe
dc.date.accessioned2017-05-08T21:45:18Z
dc.date.available2017-05-08T21:45:18Z
dc.date.copyrightJune 2011
dc.date.issued2011
dc.identifier.other%28asce%29gm%2E1943-5622%2E0000096.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/61480
dc.description.abstractThe reinforcement of soft soils by rigid inclusions is a practical and economical technique for wide-span buildings and the foundations of embankments. This method consists of placing a granular layer at the top of the network of piles to reduce vertical load on the supporting soil and vertical settlement of the upper structure. The study focuses on the modeling of load-transfer mechanisms occurring in the reinforced structure located over the network of piles with a coupling between the finite-element method (geosynthetic sheets) and discrete element method (granular layer; concrete slab in some cases). The importance of granular layer thickness to increase load-transfer intensity and to reduce vertical settlement was observed. However, without a basal geosynthetic sheet, the compressibility of soft soil has a great influence on the mechanisms. A method predicting the intensity of load transfers was proposed, based on Carlsson’s solution. The main parameters concerned are the geometry of the work and the peak and residual friction angles of the granular layer.
dc.publisherAmerican Society of Civil Engineers
dc.titleInvestigation of Load-Transfer Mechanisms in Geotechnical Earth Structures with Thin Fill Platforms Reinforced by Rigid Inclusions
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000083
dc.treeInternational Journal of Geomechanics:;2011:;Volume ( 011 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record