Show simple item record

dc.contributor.authorMartin D. Liu
dc.contributor.authorBuddhima N. Indraratna
dc.date.accessioned2017-05-08T21:45:18Z
dc.date.available2017-05-08T21:45:18Z
dc.date.copyrightJune 2011
dc.date.issued2011
dc.identifier.other%28asce%29gm%2E1943-5622%2E0000095.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/61479
dc.description.abstractThe strengths of geomaterials and their variation under different factors are investigated in this paper. First, a general isotropic variation of a strength criterion is proposed for describing the critical state and peak strengths of geomaterials. Second, the proposed criterion is extended to describe the effect of anisotropy on the peak strength. After an analysis of experimental data, the hypothesis is made that the failure of an element of geomaterial generally occurs in a particular plane when the applied shear stress in that plane reaches the shear resistance of the material. Therefore, the variation of the peak strength of anisotropic materials should be described in terms of the stress tensor applied, a vector parameter defining the position of the potential failure plane of the material, and the material properties. A general failure criterion for geomaterials with cross anisotropy is obtained then from the proposed isotropic strength criterion. The proposed criterion is demonstrated to well represent both the isotropic and anisotropic strengths of various geomaterials. Finally, a general anisotropic criterion is introduced.
dc.publisherAmerican Society of Civil Engineers
dc.titleGeneral Strength Criterion for Geomaterials Including Anisotropic Effect
dc.typeJournal Paper
dc.journal.volume11
dc.journal.issue3
dc.journal.titleInternational Journal of Geomechanics
dc.identifier.doi10.1061/(ASCE)GM.1943-5622.0000082
dc.treeInternational Journal of Geomechanics:;2011:;Volume ( 011 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record