Show simple item record

dc.contributor.authorMohamed Hwash
dc.contributor.authorJan Knippers
dc.date.accessioned2017-05-08T21:37:07Z
dc.date.available2017-05-08T21:37:07Z
dc.date.copyrightAugust 2014
dc.date.issued2014
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000452.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57596
dc.description.abstractThe paper presents experimental work to determine the load-bearing capacity, strain responses up to failure, and failure mode of pultruded carbon fiber–reinforced polymer (CFRP) strips with different deviation saddle geometries. Several tests with different deviation angles and deviation saddle radii were carried out. The results show that the tensile strength of the CFRP strip is reduced significantly by deviation, even if the deviation radius is comparatively large in relation to the thickness of the CFRP strips. Further tests were carried out to determine the influence of other important parameters on the load-bearing capacity of the strip such as surface properties of the saddle. With the help of a polyethylene layer (PE-HD) between the CFRP strip and the deviation saddle, friction could be reduced. This leads to an increase in the breaking strength of the CFRP strip. The effect of these parameters on the load-bearing capacity of the CFRP strip is presented in this article.
dc.publisherAmerican Society of Civil Engineers
dc.titleLoad-Bearing Capacity of Deviated CFRP Strips
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000449
dc.treeJournal of Composites for Construction:;2014:;Volume ( 018 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record