Show simple item record

dc.contributor.authorMichael Osei-Antwi
dc.contributor.authorJulia de Castro
dc.contributor.authorAnastasios P. Vassilopoulos
dc.contributor.authorThomas Keller
dc.date.accessioned2017-05-08T21:37:04Z
dc.date.available2017-05-08T21:37:04Z
dc.date.copyrightDecember 2013
dc.date.issued2013
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000439.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57582
dc.description.abstractThe aim of this work was to investigate to what extent the performance of a glass fiber–reinforced polymer (GFRP) sandwich slab-bridge with a uniform high-density balsa core could be improved in terms of structural efficiency and weight by using a more complex core assembly. This core consisted of high-density and low-density balsa and a fiber-reinforced polymer (FRP) arch inserted into the balsa high/low density interface. Quasi-static load-bearing experiments on sandwich arch-beams with complex core assemblies under symmetric four-point and asymmetric three-point loading were performed. The FRP arch reduced the force in the upper face sheet in the mid-span region and thus prevented compression failure of the latter, which led to a higher ultimate load. It also contributed to the shear resistance by up to 20% for symmetric loading. The best overall performance in terms of structural efficiency (stiffness and resistance) and weight resulted from a core configuration with a GFRP arch between an upper high-density and lower low-density balsa core.
dc.publisherAmerican Society of Civil Engineers
dc.titleFRP-Balsa Composite Sandwich Bridge Deck with Complex Core Assembly
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue6
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000435
dc.treeJournal of Composites for Construction:;2013:;Volume ( 017 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record