Show simple item record

dc.contributor.authorDillon S. Lunn
dc.contributor.authorSami H. Rizkalla
dc.date.accessioned2017-05-08T21:36:55Z
dc.date.available2017-05-08T21:36:55Z
dc.date.copyrightJune 2014
dc.date.issued2014
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000416.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57558
dc.description.abstractFiber-reinforced polymer (FRP) strengthening systems for infill-masonry walls are typically designed to resist flexural stresses caused by out-of-plane pressure. Previous research has shown that there are potential premature failure mechanisms caused by shear sliding of the infill, which could reduce the effectiveness of the strengthening system. Current design guidelines for strengthening of masonry walls with FRP do not include guidelines for infill-masonry. This paper presents a rational approach for the design and analysis of FRP-strengthened infill-masonry walls subjected to out-of-plane loading, including the effect of using FRP end anchorage. The approach is based on consideration of four potential mechanisms: arching, shear sliding, debonding of the FRP in the overlap region, and failure of the FRP end-anchorage system. The predictions based on the proposed rational approach agree well with the measured values from two experimental programs.
dc.publisherAmerican Society of Civil Engineers
dc.titleDesign of FRP-Strengthened Infill-Masonry Walls Subjected to Out-of-Plane Loading
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000412
dc.treeJournal of Composites for Construction:;2014:;Volume ( 018 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record