• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Composites for Construction
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Composites for Construction
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Flexural Response of Corroded Reinforced Concrete Beams Strengthened with Powder-Actuated Fastened Composites

    Thumbnail
    View/Open
    %28asce%29cc%2E1943-5614%2E0000398.pdf (9.028Mb)
    Date
    2013
    Author
    Tamer El-Maaddawy
    Amna Nessabi
    Amr El-Dieb
    Metadata
    Show full item record
    Abstract
    This paper examines the effect of corrosion exposure on the flexural response of reinforced concrete (RC) beams strengthened with a powder-actuated fastened (PAF) composite system. Twenty-one RC beams were constructed and tested to failure under four-point bending. The corroded beams were subjected to 30, 60, and 100 days of accelerated corrosion that corresponded to measured tensile steel mass losses of 6, 11, and 18%, respectively. Other test parameters included width of the fiber-reinforced polymer (FRP) composite strip, fastener length, and number of fastener rows. For the undamaged beams, the PAF-FRP system resulted in up to 24% increase in flexural capacity and 20% average reduction in beam ductility. The strengthening effectiveness reduced with increased level of corrosion damage. Nevertheless, the flexural strength of the strengthened specimens at all levels of corrosion was either higher or almost same as that of the control specimen. Increasing the fastener length increased the gain in flexural capacity of the undamaged beams but had no noticeable effect on the flexural strength gain of the corroded beams. Doubling the width of the FRP strip or number of fastener rows had insignificant effect on the flexural strength gain. An analytical model that can predict the flexural capacity of corroded RC beams strengthened with a PAF-FRP system has been introduced. The model accounts for the nonlinear behavior of materials and strain incompatibility between the PAF-FRP strip and concrete. The validity of the model has been demonstrated by comparing its predictions with the experimental results.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/57539
    Collections
    • Journal of Composites for Construction

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV