Show simple item record

dc.contributor.authorAhmed Sabry Farghaly
dc.contributor.authorBrahim Benmokrane
dc.date.accessioned2017-05-08T21:36:49Z
dc.date.available2017-05-08T21:36:49Z
dc.date.copyrightDecember 2013
dc.date.issued2013
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000388.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57528
dc.description.abstractThe shear behavior of four full-scale deep beams reinforced with carbon and glass fiber reinforced polymer (FRP) bars were investigated. The beams were supported over a 3,000-mm span with a projection of 1,000 mm on each side, with a cross section of 300 mm in width and 1,200 mm in depth, and tested to failure under four-point loading. The primary test variables included the longitudinal reinforcement ratio and the reinforcement type. The reinforcement ratio and concrete compressive strength had a clear effect on the ultimate capacity and deflection characteristics while reinforcement type no clear effect of the behavior of the tested beams. The crack patterns, mode of failure, and strains in concrete and reinforcement were also reported. The formation of the tie action was confirmed by the nearly uniform strain distribution in the longitudinal reinforcement. The results are compared to the strut-and-tie model, demonstrating the necessity of including the effect of web reinforcement and the importance of considering the effect of axial stiffness on longitudinal reinforcement.
dc.publisherAmerican Society of Civil Engineers
dc.titleShear Behavior of FRP-Reinforced Concrete Deep Beams without Web Reinforcement
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue6
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000385
dc.treeJournal of Composites for Construction:;2013:;Volume ( 017 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record