Show simple item record

dc.contributor.authorYasmeen Taleb Obaidat
dc.contributor.authorSusanne Heyden
dc.contributor.authorOla Dahlblom
dc.date.accessioned2017-05-08T21:36:47Z
dc.date.available2017-05-08T21:36:47Z
dc.date.copyrightOctober 2013
dc.date.issued2013
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000381.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57521
dc.description.abstractThis paper presents the evaluation of parameters describing bond action between fiber-reinforced polymer (FRP) and concrete in RC structures strengthened in flexure. The parameters were evaluated on the basis of fitting nonlinear finite-element results to experimental results from literature. Three-dimensional (3D) finite-element simulations were used to account for transversal effects without introducing any geometry-related correction coefficients in the material model. The parameters defining the material model, describing bond action, were initial stiffness, shear strength, and fracture energy of the FRP-concrete interface. Bilinear, trilinear, and exponential curve shapes were evaluated. The parameters were related to concrete tensile strength and shear stiffness of the adhesive. According to the analysis, the models provide a good estimation of ultimate load and strain distribution in FRP compared with test results. The results showed that whether the bond-slip curve was assumed to be bilinear, trilinear, or exponential has a minor effect.
dc.publisherAmerican Society of Civil Engineers
dc.titleEvaluation of Parameters of Bond Action between FRP and Concrete
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000378
dc.treeJournal of Composites for Construction:;2013:;Volume ( 017 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record