Show simple item record

dc.contributor.authorAhmed Mostafa
dc.contributor.authorA. Ghani Razaqpur
dc.date.accessioned2017-05-08T21:36:47Z
dc.date.available2017-05-08T21:36:47Z
dc.date.copyrightOctober 2013
dc.date.issued2013
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000380.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57519
dc.description.abstractTo delay or prevent debonding of externally bonded fiber-reinforced polymer (FRP) laminate from concrete substrate, a new carbon FRP (CFRP) anchor is developed. The monolithically built anchor comprises two legs and a wide head plate, with the legs inserted into adhesive-filled drilled holes in the concrete and the head plate bonded to the surface of the FRP laminate and the adjacent concrete. Full-scale reinforced concrete T-beams were strengthened in flexure with different amounts of CFRP laminate and tested in four-point bending. The anchor number and spacing were varied to find the most effective configuration. It was determined that the configuration involving nearly uniform spacing of the anchors along the laminate and the placement of the laminate strips between the anchor legs were most effective to allow beams with up to eight plies of the laminate to fail by rupture of FRP rather than debonding. When comparing the efficiency factor of the proposed anchor with those of other anchors reported in the literature, it was found to have the highest efficiency factor.
dc.publisherAmerican Society of Civil Engineers
dc.titleCFRP Anchor for Preventing Premature Debonding of Externally Bonded FRP Laminates from Concrete
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000377
dc.treeJournal of Composites for Construction:;2013:;Volume ( 017 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record