Show simple item record

dc.contributor.authorFatih Alemdar
dc.contributor.authorRegan Gangel
dc.contributor.authorAdolfo Matamoros
dc.contributor.authorCaroline Bennett
dc.contributor.authorRon Barrett-Gonzalez
dc.contributor.authorStan Rolfe
dc.contributor.authorHao Liu
dc.date.accessioned2017-05-08T21:36:46Z
dc.date.available2017-05-08T21:36:46Z
dc.date.copyrightAugust 2014
dc.date.issued2014
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000372.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57511
dc.description.abstractFiber-reinforced polymer (FRP) overlays have been successfully used in the aerospace industry to repair fatigue damage in aluminum plates. With this success there is potential for use of similar FRP overlays to repair fatigue damage in aging steel bridge structures. This study investigated the effectiveness of repairing fatigue damage in steel plate with adhesively bonded carbon fiber–reinforced polymer (CFRP) overlays. A total of 15 steel plate specimens with preexisting fatigue cracks were repaired with varying thicknesses of CFRP overlays to evaluate the effect of the ratio of axial stiffness of the composite to that of the underlying steel, the axial stiffness ratio (SR), on increased fatigue life and decreased applied stress. The results showed that increasing the axial stiffness ratio from 0 to 0.4 could increase the fatigue life by a factor of 10 for the most extreme conditions, and with an optimal axial stiffness ratio infinite fatigue life may be reached. Fatigue life of the steel specimens in this study was found to be dependent on both axial stiffness and applied stress range. Results from finite-element analyses validated the use of axial stiffness as a design parameter and correlated to the experimental results discussed.
dc.publisherAmerican Society of Civil Engineers
dc.titleUse of CFRP Overlays to Repair Fatigue Damage in Steel Plates under Tension Loading
dc.typeJournal Paper
dc.journal.volume18
dc.journal.issue4
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000368
dc.treeJournal of Composites for Construction:;2014:;Volume ( 018 ):;issue: 004
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record