Show simple item record

dc.contributor.authorPeng Feng
dc.contributor.authorYanhua Zhang
dc.contributor.authorYu Bai
dc.contributor.authorLieping Ye
dc.date.accessioned2017-05-08T21:36:42Z
dc.date.available2017-05-08T21:36:42Z
dc.date.copyrightJune 2013
dc.date.issued2013
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000356.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57493
dc.description.abstractThis paper reports on axial compression experiments on 18 specimens that were strengthened using fiber-reinforced polymer (FRP) fabric and bamboo sticks to improve buckling resistance. The core steel members were first bundled with bamboo sticks longitudinally using steel wire and were then wrapped longitudinally and laterally with FRP fabric. The bending stiffness and load-bearing capacity of the members were increased by the strengthening system, and the bamboo sticks acted as lightweight and free-shaped filling between the steel and FRP. Three major parameters were examined: (1) the cross-sectional shape; (2) the nominal slenderness ratio of the steel members; (3) the number of FRP fabric layers. Although global buckling that is analogous to that in unstrengthened specimens was observed, the strengthened specimens exhibited significant local deformation at the end of the steel member and rupture of the FRP fabric at midheight. The load-displacement results demonstrated an increase of 25–114% for load-bearing capacity and a maximum increase of up to
dc.publisherAmerican Society of Civil Engineers
dc.titleCombination of Bamboo Filling and FRP Wrapping to Strengthen Steel Members in Compression
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000353
dc.treeJournal of Composites for Construction:;2013:;Volume ( 017 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record