• Login
    View Item 
    •   DSpace Home
    • ASCE
    • Journal of Composites for Construction
    • View Item
    •   DSpace Home
    • ASCE
    • Journal of Composites for Construction
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Bond Behavior between Basalt Fiber–Reinforced Polymer Sheet and Concrete Substrate under the Coupled Effects of Freeze-Thaw Cycling and Sustained Load

    Thumbnail
    View/Open
    %28asce%29cc%2E1943-5614%2E0000352.pdf (1.607Mb)
    Date
    2013
    Author
    Jiawei Shi
    Hong Zhu
    Zhishen Wu
    Rudolf Seracino
    Gang Wu
    Metadata
    Show full item record
    Abstract
    This paper presents an experimental investigation on the bond behavior between basalt fiber–reinforced polymer (BFRP) sheet and concrete substrate under the coupled effects of freeze-thaw cycling and sustained load. Test variables were freeze-thaw cycles, level of sustained load, and adhesive type. Double-lap shear specimens were used in the tests, and a specially designed reaction-loading system was used to apply the sustained load during freeze-thaw cycles. Specimens with or without sustained load were exposed to up to 300 freeze-thaw cycles. A modified epoxy resin, made by adding a toughening agent to the original epoxy resin, was used in the test to study the effect of adhesive type on the durability of the BFRP–concrete interface. Coupon tests were also conducted to determine the freeze-thaw resistance of the constituent materials of the BFRP–concrete interface. After exposure, double-lap shear tests were carried out to investigate the residual bond capacity of the BFRP–concrete interface. Digital image correlation measurement was applied to capture the full-field deformation of the FRP sheet and the concrete block during the double-lap shear tests. A nonlinear bond-slip relationship of the BFRP–concrete interface was determined based on the analysis of displacement data. Test results show that (1) the bond capacity of the BFRP–concrete interface decreases with increasing freeze-thaw cycles, (2) the failure mode changes from debonding in the concrete layer to debonding in the adhesive layer, (3) extra degradation of the bond-slip relationship could be caused by the coupled effects, and (4) the durability improvement of the adhesive may result in a better durability of the BFRP–concrete bond capacity in a freeze-thaw environment. Finally, the coupled effects and evaluation of freeze-thaw procedures on the bond degradation of FRP–concrete interface are discussed.
    URI
    http://yetl.yabesh.ir/yetl/handle/yetl/57489
    Collections
    • Journal of Composites for Construction

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV
     

     

    Browse

    All of DSpaceCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    LoginRegister

    Statistics

    View Usage Statistics

    DSpace software copyright © 2002-2015  DuraSpace
    Contact Us | Send Feedback
    Theme by 
    @mire NV