Show simple item record

dc.contributor.authorG. M. Chen
dc.contributor.authorJ. G. Teng
dc.contributor.authorJ. F. Chen
dc.date.accessioned2017-05-08T21:36:36Z
dc.date.available2017-05-08T21:36:36Z
dc.date.copyrightFebruary 2013
dc.date.issued2013
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000316.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57450
dc.description.abstractRC beams shear strengthened with externally bonded fiber-reinforced polymer (FRP) U strips or side strips usually fail owing to debonding of the bonded FRP shear reinforcement. Because such debonding usually occurs in a brittle manner at relatively small shear crack widths, some of the internal steel stirrups intersected by the critical shear crack may not have reached yielding at beam shear failure. Consequently, the yield stress of internal steel stirrups in such a strengthened RC beam cannot be fully utilized. This adverse shear interaction between the internal steel shear reinforcement and the external FRP shear reinforcement may significantly reduce the benefit of the shear-strengthening FRP but has not been considered explicitly by any of the shear strength models in the existing design guidelines. This paper presents a new shear strength model considering this adverse shear interaction through the introduction of a shear interaction factor. A comprehensive evaluation of the proposed model, as well as three other shear strength models, is conducted using a large test database. It is shown that the proposed shear strength model performs the best among the models compared, and the performance of the other shear strength models can be significantly improved by including the proposed shear interaction factor. Finally, a design recommendation is presented.
dc.publisherAmerican Society of Civil Engineers
dc.titleShear Strength Model for FRP-Strengthened RC Beams with Adverse FRP-Steel Interaction
dc.typeJournal Paper
dc.journal.volume17
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000313
dc.treeJournal of Composites for Construction:;2013:;Volume ( 017 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record