Show simple item record

dc.contributor.authorHamed Layssi
dc.contributor.authorWilliam D. Cook
dc.contributor.authorDenis Mitchell
dc.date.accessioned2017-05-08T21:36:28Z
dc.date.available2017-05-08T21:36:28Z
dc.date.copyrightJune 2012
dc.date.issued2012
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000262.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57390
dc.description.abstractThe reversed cyclic loading behavior of full-scale shear wall specimens was investigated before and after retrofit. The wall specimens were designed and detailed to simulate nonductile reinforced concrete construction of the 1960s, having lap splices of the longitudinal reinforcement in the potential plastic hinge region, and having inadequate confinement of the boundary regions. The lap splices in these walls failed in a brittle manner before yielding occurred in the main flexural reinforcement. The use and effectiveness of carbon fiber-reinforced polymer (CFRP) wrap for improving the lap splice behavior and the shear strength of the walls were investigated. The walls were tested under reversed cyclic loading with loading applied near the tip of the walls. The retrofit technique improved the displacement ductility, energy dissipation, and prevented premature failure of the lap splices. The target ductility level of 2.0 was achieved with this CFRP retrofit.
dc.publisherAmerican Society of Civil Engineers
dc.titleSeismic Response and CFRP Retrofit of Poorly Detailed Shear Walls
dc.typeJournal Paper
dc.journal.volume16
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000259
dc.treeJournal of Composites for Construction:;2012:;Volume ( 016 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record