Show simple item record

dc.contributor.authorChakib Kassem
dc.contributor.authorAhmed Sabry Farghaly
dc.contributor.authorBrahim Benmokrane
dc.date.accessioned2017-05-08T21:36:24Z
dc.date.available2017-05-08T21:36:24Z
dc.date.copyrightOctober 2011
dc.date.issued2011
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000219.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57343
dc.description.abstractFlexural behavior and serviceability performance of 24 full-scale concrete beams reinforced with carbon-, glass-, and aramid-fiber-reinforced-polymer (FRP) bars are investigated. The beams were 3,300 mm long with a rectangular cross section of 200 mm in width and 300 mm in depth. Sixteen beams were reinforced with carbon-FRP bars, four beams were reinforced with glass-FRP bars, two beams were reinforced with aramid-FRP bars, and two were reinforced with steel, serving as control specimens. Two types of FRP bars with different surface textures were considered: sand-coated bars and ribbed-deformed bars. The beams were tested to failure in four-point bending over a clear span of 2,750 mm. The test results are reported in terms of deflection, crack-width, strains in concrete and reinforcement, flexural capacity, and mode of failure. The experimental results were compared to the available design codes.
dc.publisherAmerican Society of Civil Engineers
dc.titleEvaluation of Flexural Behavior and Serviceability Performance of Concrete Beams Reinforced with FRP Bars
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000216
dc.treeJournal of Composites for Construction:;2011:;Volume ( 015 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record