Show simple item record

dc.contributor.authorBehzad D. Manshadi
dc.contributor.authorAnastasios P. Vassilopoulos
dc.contributor.authorThomas Keller
dc.date.accessioned2017-05-08T21:36:18Z
dc.date.available2017-05-08T21:36:18Z
dc.date.copyrightJune 2011
dc.date.issued2011
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000170.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57290
dc.description.abstractThin webs of glass-fiber-reinforced polymer (GFRP) girders are sensitive to shear buckling, which can be considered an in-plane biaxial compression-tension buckling problem, according to the rotated stress field theory. An extensive experimental study was performed, which shows that an increasing transverse tension load significantly increases the buckling and ultimate loads caused by a decrease in the initial imperfections and additional stabilizing effects. The stacking sequence also greatly influenced the buckling behavior. Higher bending stiffness in the compression direction increased the buckling and ultimate loads, while higher bending stiffness in the tension direction changed the buckling mode shape. The general solution obtained using the Fok model accurately modeled the experimental results, while the simplified solution (modified Southwell method) provided accurate results only at higher tension loads.
dc.publisherAmerican Society of Civil Engineers
dc.titleShear Buckling Resistance of GFRP Plate Girders
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000167
dc.treeJournal of Composites for Construction:;2011:;Volume ( 015 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record