Show simple item record

dc.contributor.authorG. M. Chen
dc.contributor.authorJ. G. Teng
dc.contributor.authorJ. F. Chen
dc.date.accessioned2017-05-08T21:36:16Z
dc.date.available2017-05-08T21:36:16Z
dc.date.copyrightJune 2011
dc.date.issued2011
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000160.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57278
dc.description.abstractIntermediate crack-induced debonding (IC debonding) is a common failure mode of RC beams strengthened with externally bonded fiber-reinforced polymer (FRP) reinforcement. Although extensive research has been carried out on IC debonding, much work is still needed to develop a better understanding of the failure mode and a more reliable strength model. This paper presents an advanced finite-element (FE) model on the basis of the smeared-crack approach for predicting IC debonding failure. Existing FE models of the same type are generally deficient in capturing localized cracks (both their pattern and widths). This deficiency is overcome in the proposed FE model through the accurate modeling of interfaces between the concrete and both the internal steel and the external FRP reinforcements. The capability and accuracy of the proposed model are demonstrated through comparisons of its predictions with selected test results. The importance of accurate modeling of localized cracking is also explained using numerical results obtained from the FE model.
dc.publisherAmerican Society of Civil Engineers
dc.titleFinite-Element Modeling of Intermediate Crack Debonding in FRP-Plated RC Beams
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000157
dc.treeJournal of Composites for Construction:;2011:;Volume ( 015 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record