Show simple item record

dc.contributor.authorMargherita Stefania Sciolti
dc.contributor.authorMariaenrica Frigione
dc.contributor.authorMaria Antonietta Aiello
dc.date.accessioned2017-05-08T21:36:13Z
dc.date.available2017-05-08T21:36:13Z
dc.date.copyrightDecember 2010
dc.date.issued2010
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000135.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57250
dc.description.abstractThe assessment of durability of fiber-reinforced polymers (FRPs), used to strengthen masonry or concrete structures, if subjected to weathering is a knotty problem. Environmental factors can have a significant effect on their performance in service. In order to investigate on this aspect, the mechanical behavior of two commercial composites, reinforced with unidirectional carbon and glass fibers, was analyzed after a long-term immersion in distilled water. For comparison purposes, three different commercial epoxy resins, used as primer, putty, or adhesive to manufacture and apply the composites through the wet lay-up technique to the surfaces to strengthen, were subjected to the same treatment. In order to take into account the peculiarities of the three cold-curing epoxy resins, a novel procedure to dry the specimens before the immersion treatment was used. The mechanical tests, performed on the composites before and after their immersion in water, evidenced that this agent has a limited effect only on the in-plane tensile strength of wet lay-up manufactured glass FRP, while the mechanical properties of carbon FRP are substantially unaffected by water. On the other hand, the effect of water on the thermal and mechanical characteristics of the three epoxy resins is quite severe, with significant reductions in the glass transition temperature, stiffness, and strength.
dc.publisherAmerican Society of Civil Engineers
dc.titleWet Lay-Up Manufactured FRPs for Concrete and Masonry Repair: Influence of Water on the Properties of Composites and on Their Epoxy Components
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue6
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000132
dc.treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record