Show simple item record

dc.contributor.authorC. Cui
dc.contributor.authorS. A. Sheikh
dc.date.accessioned2017-05-08T21:36:11Z
dc.date.available2017-05-08T21:36:11Z
dc.date.copyrightOctober 2010
dc.date.issued2010
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000119.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57233
dc.description.abstractThe experimental program reported here was conducted to gain insight into the behavior of concrete confined with fiber-reinforced polymers (FRPs). A total of 112 cylindrical concrete specimens, each 150 mm in diameter, 300 mm in height, and concrete strength up to 112 MPa, were tested under monotonic uniaxial compression. Test variables included amount of FRP, strength and stiffness of FRP, concrete strength, and the health of concrete at the time of strengthening. Results showed that, with an increase of the unconfined concrete strength, the strength enhancement, energy absorption capacity, ductility factor, and work (energy) index at rupture of FRP jackets all decreased remarkably. A positive correlation was found between concrete ductility and FRP rupture strain. A gradual post-peak failure of the specimens, observed previously from FRP-confined concrete columns tested at the University of Toronto, was also observed in some of the current tests. This ductile failure, attributed to the gradual unzipping failure of FRP jacket, is related to specimen size and is explained in terms of various confinement parameters.
dc.publisherAmerican Society of Civil Engineers
dc.titleExperimental Study of Normal- and High-Strength Concrete Confined with Fiber-Reinforced Polymers
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000116
dc.treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record