Show simple item record

dc.contributor.authorBing Li
dc.contributor.authorChee Leong Lim
dc.date.accessioned2017-05-08T21:36:10Z
dc.date.available2017-05-08T21:36:10Z
dc.date.copyrightOctober 2010
dc.date.issued2010
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000113.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57226
dc.description.abstractThis paper presents the results of an experimental study on the seismic performance of axially loaded reinforced concrete (RC) walls with boundary elements confined by limited transverse reinforcement. These specimens were initially subjected to axial compression loading and cyclic lateral loading to failure, and subsequently repaired and subjected to loading again. The test specimens include two low-rise walls of aspect ratio 1.125 and two medium-rise walls of aspect ratio 1.625. Results show that significant drift capacities were achieved from the strengthened walls. The performance of the repaired walls was similar to the original walls before repair in terms of the flexural behavior, shear strength, and ductility capacities. While the fiber-reinforced polymer (FRP) anchorage may undergo premature failure, it however failed only after the peak lateral strength of the repaired wall was attained. This paper demonstrates that repair of damaged RC walls using FRP is able to restore the performance of damaged RC walls while also serving as repair method of relative ease.
dc.publisherAmerican Society of Civil Engineers
dc.titleTests on Seismically Damaged Reinforced Concrete Structural Walls Repaired Using Fiber-Reinforced Polymers
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue5
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000110
dc.treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 005
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record