Show simple item record

dc.contributor.authorA. Deifalla
dc.contributor.authorA. Ghobarah
dc.date.accessioned2017-05-08T21:36:08Z
dc.date.available2017-05-08T21:36:08Z
dc.date.copyrightJune 2010
dc.date.issued2010
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000094.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57206
dc.description.abstractIn several cases of loading and geometrical configurations, flexure beams, and girders are subjected to combined shear and torsion. Failure of a structural element under combined shear and torsion is brittle in nature. Externally bonded fiber-reinforced polymer (FRP) fabrics are currently being studied and used for the rehabilitation, repair, and retrofit of concrete structure. The objective of this study is to investigate the strengthening techniques for T-beams subjected to combined shear and torsion. Six half-scale beams—two control specimen and four strengthened beams—were constructed and tested using a specially designed test setup that subjects the beam to combined shear and torsion with different ratios. Four strengthening techniques using carbon FRPs were tested. The experimental results were reported and analyzed to assess the effectiveness of the proposed strengthening techniques. An innovative strengthening technique namely the extended U-jacket showed promising results in terms of strength and ductility while being quite feasible for strengthening. Future areas of research are being outlined.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrengthening RC T-Beams Subjected to Combined Torsion and Shear Using FRP Fabrics: Experimental Study
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000091
dc.treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record