Show simple item record

dc.contributor.authorDavid T. Borowicz
dc.contributor.authorLawrence C. Bank
dc.date.accessioned2017-05-08T21:36:08Z
dc.date.available2017-05-08T21:36:08Z
dc.date.copyrightApril 2011
dc.date.issued2011
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000086.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57197
dc.description.abstractResults of the behavior of pultruded fiber-reinforced polymer (FRP) I-shaped beams subjected to concentrated loads in the plane of the web are presented. Twenty beams with nominal depths from 152.4 to 304.8 mm were tested in three-point bending with a span-to-depth ratio of four. Load was applied to the top flange directly above the web—12 without bearing plates and 8 with bearing plates of varying width and thickness. All test specimens failed with a wedgelike shear failure at the upper web-flange junction. Finite-element results support experimental findings from strain gauge and digital image correlation data. Bearing plates increased beam capacity by 35% or more as a function of bearing plate width and thickness. Bearing plates increased average shear stress in the web at failure from 17.4 to 27.2 MPa—below the accepted value of in-plane shear strength (69 MPa). A design equation is presented, and predicted capacities are compared with experimental results. The average value of experimental capacity to predicted capacity is 1.12 with a standard deviation of 0.11 and coefficient of variation (COV) of 0.10 for sections up to 304.8 mm deep.
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Pultruded Fiber-Reinforced Polymer Beams Subjected to Concentrated Loads in the Plane of the Web
dc.typeJournal Paper
dc.journal.volume15
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000082
dc.treeJournal of Composites for Construction:;2011:;Volume ( 015 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record