Show simple item record

dc.contributor.authorHamdy M. Mohamed
dc.contributor.authorRadhouane Masmoudi
dc.date.accessioned2017-05-08T21:36:06Z
dc.date.available2017-05-08T21:36:06Z
dc.date.copyrightApril 2010
dc.date.issued2010
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000069.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57182
dc.description.abstractThis paper presents the experimental and theoretical results of small and medium-scale concrete-filled fiber-reinforced polymer (FRP) tube (CFFT) columns. A total of 23 CFFT specimens were tested under axial compression load. Five different types of new FRP tubes were used as stay-in-place formwork for the columns. The effects of the following parameters were examined: the FRP-confinement ratio, the unconfined concrete compressive strength, the presence of longitudinal steel reinforcement, and the height-to-diameter ratio. Comparisons between the experimental test results and the theoretical prediction values by the three North American codes and design guidelines (ACI 440.2R-08, CSA-S6-06, and CSA-S806-02) are performed in terms of confined concrete strength and ultimate load carrying capacity. The results of this investigation indicate that the design equations of the ACI 440.2R-08, CAN/CSA-S6-06, and CAN/CSA-S806-02 overestimate the factored axial load capacity of the short CFFT columns as compared to the yield and crack load levels. Also, the CAN/CSA-S6-06 and CAN/CSA-S806-02 confinement models showed conservative predictions, while the ACI 440.2R-08 was slightly less conservative. A new confinement model is proposed for the confined concrete compressive strength of the CFFT cylinders. Also, the design equations are modified to accurately predict the ultimate and yield load capacities of internally reinforced and unreinforced short CFFT columns. Two new factors are introduced in the modified equations,
dc.publisherAmerican Society of Civil Engineers
dc.titleAxial Load Capacity of Concrete-Filled FRP Tube Columns: Experimental versus Theoretical Predictions
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue2
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000066
dc.treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 002
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record