Show simple item record

dc.contributor.authorH. Toutanji
dc.contributor.authorM. Han
dc.contributor.authorJ. Gilbert
dc.contributor.authorS. Matthys
dc.date.accessioned2017-05-08T21:36:05Z
dc.date.available2017-05-08T21:36:05Z
dc.date.copyrightFebruary 2010
dc.date.issued2010
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000055.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57166
dc.description.abstractThis paper focuses on axially loaded, large-scale rectangular RC columns confined with fiber-reinforced polymer (FRP) wrapping. Experimental tests are conducted to obtain the stress-strain response and ultimate load for three field-size columns having different aspect ratios and/or corner radii. Effective transverse FRP failure strain and the effect of increasing confining action on the stress-strain behavior are examined. Existing strength models, the majority of which were developed for small-scale specimens, are applied to predict the structural response. Since some of them fail to adequately characterize the test data and others are complex and require significant calculation, a simple design-oriented model is developed. The new model is based on the confinement effectiveness coefficient, an aspect ratio coefficient, and a corner radius coefficient. It accurately predicts the axial ultimate strength of the large-scale columns at hand and, when applied to the small-scale columns studied by other investigators, produces reasonable results.
dc.publisherAmerican Society of Civil Engineers
dc.titleBehavior of Large-Scale Rectangular Columns Confined with FRP Composites
dc.typeJournal Paper
dc.journal.volume14
dc.journal.issue1
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000051
dc.treeJournal of Composites for Construction:;2010:;Volume ( 014 ):;issue: 001
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record