Show simple item record

dc.contributor.authorAntonio Borri
dc.contributor.authorPaolo Casadei
dc.contributor.authorGiulio Castori
dc.contributor.authorJohn Hammond
dc.date.accessioned2017-05-08T21:36:03Z
dc.date.available2017-05-08T21:36:03Z
dc.date.copyrightDecember 2009
dc.date.issued2009
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000033.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57143
dc.description.abstractThe objective of this study is to investigate the efficiency of an innovative technique for strengthening masonry arches, based on the use of high strength steel cords embedded in either an epoxy (steel reinforced polymer) or mortar matrix (steel reinforced grout). Ten prototypes of brickwork arches strengthened by composite laminates were tested under a monotonic vertical load applied at the quarter-span. Load tests were performed to compare the behavior up to collapse of strengthened masonry arches; the influence of the types of reinforcement (steel and carbon fibers) and matrices (epoxy and cementitious), as well as location of the strengthening layer (intrados, extrados, and both) and the presence of anchorage systems has been investigated. The experimental results highlight the enhanced strength of the arches reinforced with steel cords, as well as the role of the mechanical anchoring with regard to the resulting final strength.
dc.publisherAmerican Society of Civil Engineers
dc.titleStrengthening of Brick Masonry Arches with Externally Bonded Steel Reinforced Composites
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue6
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000030
dc.treeJournal of Composites for Construction:;2009:;Volume ( 013 ):;issue: 006
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record