Show simple item record

dc.contributor.authorYu Bai
dc.contributor.authorThomas Keller
dc.date.accessioned2017-05-08T21:36:02Z
dc.date.available2017-05-08T21:36:02Z
dc.date.copyrightJune 2009
dc.date.issued2009
dc.identifier.other%28asce%29cc%2E1943-5614%2E0000005.pdf
dc.identifier.urihttp://yetl.yabesh.ir/yetl/handle/yetl/57127
dc.description.abstractWhen structural elements are subjected to compressive loads, the shear forces and stresses induced by second-order effects may lead to shear failure prior to compressive failure. This is particularly likely to occur in the case of pultruded glass fiber-reinforced polymer profiles, which normally exhibit low shear strength in relation to compressive strength. This paper analyzes the effects of initial imperfection, slenderness, shear-to-compressive strength ratio, shear coefficient, and type of shear failure criterion on ultimate load and failure mode (shear or compressive failure). A formulation for predicting ultimate load based on shear failure and second-order deformation is proposed. The results obtained compare well with similar results obtained using other methods and experimental data available in literature. The proposed method is based strictly on mechanics and thus requires no fitting to experimental data.
dc.publisherAmerican Society of Civil Engineers
dc.titleShear Failure of Pultruded Fiber-Reinforced Polymer Composites under Axial Compression
dc.typeJournal Paper
dc.journal.volume13
dc.journal.issue3
dc.journal.titleJournal of Composites for Construction
dc.identifier.doi10.1061/(ASCE)CC.1943-5614.0000003
dc.treeJournal of Composites for Construction:;2009:;Volume ( 013 ):;issue: 003
dc.contenttypeFulltext


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record